Console

POSTGet Events by Type

Data APIhttps://web3.nodit.io/v1/aptos/mainnet/blockchain/getEventsByType

Retrieves the list of events filtered by a specific event type.

Path Parameters
chainstring (enum)required

Parameter to specify the target chain for the query.

networkstring (enum)required

Parameter to specify the network of the target chain. Supported networks may vary depending on the chain.

Request Body
eventTypestringrequired

Parameter specifying the event type to query. Event type refers to the name of the event struct defined in the module. This field must be entered in the format module_address::module_name::event_name.

fromBlockstring

Parameter specifying the starting block for the query. You can enter one of the following formats:

  • block number: Enter block number as a decimal string.
  • block hash: 64-character hexadecimal (including "0x").
  • block tag: Use "earliest" or "latest" to specify the first block or the most recent block.

Notes:

  • This field cannot be used together with fromDate and toDate.
  • If provided without fromBlock, results are queried from genesis block to this block.
  • toBlock value cannot be less than fromBlock value.
  • If fromBlock and toBlock have the same value, only that block is queried.
  • "earliest" for toBlock is only allowed when fromBlock is "earliest".
  • If fromBlock and toBlock are not provided, the API queries data from the latest 30 days.
toBlockstring

Parameter specifying the ending block for the query. You can enter one of the following formats:

  • block number: Enter block number as a decimal string.
  • block hash: 64-character hexadecimal (including "0x").
  • block tag: Use "earliest" or "latest" to specify the first block or the most recent block.

Notes:

  • This field cannot be used together with fromDate and toDate.
  • If provided without fromBlock, results are queried from genesis block to this block.
  • toBlock value cannot be less than fromBlock value.
  • If fromBlock and toBlock have the same value, only that block is queried.
  • "earliest" for toBlock is only allowed when fromBlock is "earliest".
  • If fromBlock and toBlock are not provided, the API queries data from the latest 30 days.
fromDatestring

Parameter specifying the start date for the query. Date must follow ISO 8601 format (YYYY-MM-DDThh:mm:ss{time zone}) including seconds.

Notes:

  • If provided without toDate, results are queried from this date to the latest block.
  • fromDate value must be equal to or earlier than toDate value.
  • If fromDate and toDate have the same value, only blocks from that date are queried.
  • This field cannot be used together with fromBlock and toBlock.
  • If fromDate and toDate are not provided, the API queries data from the latest 30 days.
toDatestring

Parameter specifying the end date for the query. Date must follow ISO 8601 format (YYYY-MM-DDThh:mm:ss{time zone}) including seconds.

Notes:

  • If provided without fromDate, results are queried from genesis block to this date.
  • toDate value must be equal to or later than fromDate value.
  • If fromDate and toDate have the same value, only blocks from that date are queried.
  • This field cannot be used together with fromBlock and toBlock.
  • If fromDate and toDate are not provided, the API queries data from the latest 30 days.
pageinteger

The page parameter specifies the data page to query. It accepts values up to 100; for pages exceeding 100, use the cursor pagination method.

The page and cursor parameters cannot be used together. If both page and cursor are empty, cursor pagination is used.

rppinteger

rpp stands for results per page and specifies the page size. You can specify a number greater than 0 and up to 100.

cursorstring

The cursor parameter supports pagination and data navigation between pages. Provide the cursor value from the previous page in the next request to load the next page of data.

The page and cursor parameters cannot be used together. If both page and cursor are empty, cursor pagination is used.

withCountboolean

Parameter specifying whether to include the count field in the response. The count field indicates the total number of requested data items. When set to true, the count field is included and response speed may be slower.

Responses
pageinteger

Field representing the page number specified in the page parameter. This field is only included in the response when a value greater than 0 is specified for the page parameter.

rppinteger

Field representing the number of results per page specified in the rpp parameter.

cursorstring

A field for cursor pagination. This value must be provided in the next request to load the next page of data.

countinteger

Field representing the total count of requested data. This field is only included in the response when true is set for the withCount parameter.

fromDatestring

Field representing the start of the query range in Date mode. Returned in ISO 8601 format.

toDatestring

Field representing the end of the query range in Date mode. Returned in ISO 8601 format.

fromBlockinteger

Field representing the start block height of the query range in Block mode.

toBlockinteger

Field representing the end block height of the query range in Block mode.

fromLedgerinteger

Field representing the start ledger index of the query range in Ledger mode.

toLedgerinteger

Field representing the end ledger index of the query range in Ledger mode.

transactionHashstringrequired

A field that represents the hash of the transaction containing the event. A cryptographic hash computed from all transaction data, provided as a 64-character hexadecimal string prefixed with 0x. This hash enables retrieval of full information for the transaction related to the event.

예: 0x2a41cd44491bb92d4eb17d8487f82d9b43ab6289074c1986ee055be8105707c9

transactionVersionintegerrequired

A field that represents the version of the transaction. A unique sequence ID indicating the order of the transaction on the chain, incrementing sequentially from 0. Used to ensure transaction execution order and to query the state of a specific transaction.

예: 2854257037

blockHeightintegerrequired

A field that represents the height of the block containing the transaction. Provided as an integer that increments sequentially from the genesis block (0). Used to identify which block the transaction was included in and to verify if the transaction has been finalized.

예: 160155267

blockTimestampintegerrequired

A field that represents the block creation time. Provided as a UNIX timestamp, used for block creation order and time tracking. Block timestamps are used to ensure transaction order and measure inter-block creation intervals.

예: 1749003732416395

eventIndexintegerrequired

A field that represents the order index of the event within the transaction. Indicates the order of the current event among multiple events emitted in a single transaction. Starts at 0 and increments in event emission order; used to identify the order of events within the same transaction.

예: 0

eventTypestringrequired

A field that represents the type of the event. Provided as the full path (address::module::struct) of the event struct defined in the Move module. Used to identify the type of operation that caused the balance change.

예: 0x1::coin::WithdrawEvent

accountAddressstringrequired

A field that represents the address of the resource owner that emitted the event. Provided as a 64-character hexadecimal string prefixed with 0x; identifies the owner of the resource where the event occurred. The account that owns the event handle; can be used as a filter condition when querying events.

예: 0x948592877d14d0fde0a42e2fc15a56959f30ea35d0b87c7ee8e98e0cce756f1a

dataobjectrequired

A field that represents the specific data of the event. The fields of the event struct defined in eventType are provided as a JSON object. Contains the event details and may have different structures depending on the event type.

예: [object Object]

creationNumberintegerrequired

A field that represents the creation number of the event handle. A unique identifier to distinguish event handles created by an account, incrementing sequentially from 0. Used to distinguish different types of events emitted from the same account.

예: 2

sequenceNumberintegerrequired

A field that represents the sequence number of the event emitted from the event handle. Indicates the order of events emitted from the same event handle. Starts at 0 and increments sequentially; ensures the time order of events emitted from a specific event handle.

예: 12345

objectAddressstringrequired

A field that represents the address of the Object when the event is for an Object resource. Provided as a 64-character hexadecimal string prefixed with 0x; the unique identifier for Object-based resources. Used to track and query events related to Object resources.

예: 0xbae207659db88bea0cbead6da0ed00aac12edcdda169e591cd41c94180b46f3b

objectOwnerAddressstringrequired

A field that represents the owner address of the Object identified by objectAddress. Provided as a 64-character hexadecimal string prefixed with 0x; identifies the current owner of the Object. Used for Object ownership tracking and permission verification.

예: 0x948592877d14d0fde0a42e2fc15a56959f30ea35d0b87c7ee8e98e0cce756f1a

X-API-KEY
RequestCU150
cURL
curl -X POST "https://web3.nodit.io/v1/aptos/mainnet/blockchain/getEventsByType" \
  -H "X-API-KEY: {YOUR_API_KEY}" \
  -H "Content-Type: application/json" \
  -d '{
  "eventType": "0x1::coin::CoinDeposit",
  "fromDate": "2026-01-01T00:00:00Z",
  "toDate": "2026-02-01T00:00:00Z",
  "page": 1,
  "rpp": 10
}'
Response
Example · 200
{
  "page": 0,
  "rpp": 0,
  "cursor": "string",
  "count": 0,
  "range": {
    "fromDate": "string",
    "toDate": "string",
    "fromBlock": 0,
    "toBlock": 0,
    "fromLedger": 0,
    "toLedger": 0
  },
  "items": [
    {
      "transactionHash": "0x2a41cd44491bb92d4eb17d8487f82d9b43ab6289074c1986ee055be8105707c9",
      "transactionVersion": 2854257037,
      "blockHeight": 160155267,
      "blockTimestamp": 1749003732416395,
      "eventIndex": 0,
      "eventType": "0x1::coin::WithdrawEvent",
      "accountAddress": "0x948592877d14d0fde0a42e2fc15a56959f30ea35d0b87c7ee8e98e0cce756f1a",
      "data": {
        "amount": "1000000",
        "from": "0x948592877d14d0fde0a42e2fc15a56959f30ea35d0b87c7ee8e98e0cce756f1a",
        "to": "0xa1b2c3d4e5f6a1b2c3d4e5f6a1b2c3d4e5f6a1b2c3d4e5f6a1b2c3d4e5f6a1b2"
      },
      "creationNumber": 2,
      "sequenceNumber": 12345,
      "objectAddress": "0xbae207659db88bea0cbead6da0ed00aac12edcdda169e591cd41c94180b46f3b",
      "objectOwnerAddress": "0x948592877d14d0fde0a42e2fc15a56959f30ea35d0b87c7ee8e98e0cce756f1a"
    }
  ]
}

Last updated